MakerLab创客实验室 — Let's Make something.
现在注册
已注册用户请 登入
MakerLab创客实验室 — Let's Make something.
现在注册
已注册用户请 登入
jackylin large avatar

jackylin

MakerLab创客实验室 第 299 号会员, 加入于 2014-07-30 22:56:34 PM
jackylin 收藏的学习
jackylin 收藏的话题
jackylin 最近创建的学习教程
jackylin 最近的回复
是上传楼主的中文delta固件,把电机线反了装也是一样的情况,是否真是MEGA2560板短路烧坏(冒烟是这板上电源接头旁那个长方体元件),另ramps上D1那二极管是有焊上的,但接了电源器200-240V/29A-12V仍须要插上USB线显示屏才能显示,是否有参数未设定,求教感谢
Connecting...
start
Printer is now online.
echo: External Reset
Marlin 1.0.0
echo: Last Updated: Aug 4 2014 19:24:31 | Author: (MakerLab, Delta)
Compiled: Aug 4 2014
echo: Free Memory: 2998 PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z80.00 E100.00
echo:Maximum feedrates (mm/s):
echo: M203 X200.00 Y200.00 Z200.00 E200.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X9000 Y9000 Z9000 E9000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z20.00 E20.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:Endstop adjustement (mm):
echo: M666 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P22.20 I1.08 D114.00
Error:0
[ERROR] Error:0

: Extruder switched off. MINTEMP triggered !
Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
[ERROR] Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

echo:SD init fail
这是在上位机连线给出的讯号,先前在限位开关接线是接错,应该有导致板短路冒烟赶紧关电源,不知是否真是板烧坏所以电机轴向失调
OK了
这固件是不是要买你的板才能倒入这中文固件,我的板是ramps1.4+12864的LCD,刷入后,液晶一样不能显示,求教