MakerLab创客实验室 — Let's Make something.
现在注册
已注册用户请 登入
duane1989 large avatar
MakerLab创客实验室  ›  新手入门

关于三角洲回原点问题,求解

By duane1989 at 2 年前 , 1037 次浏览

回原点时,三轴会向下移动一小段距离,并没有触发限位开关。并且回原点后三轴的移动距离增加了十倍,如0.1mm变成了1mm。固件用的你们提供的马林固件,请问怎么解决啊?
Connecting...
start
Printer is now online.
echo: External Reset
Marlin 1.0.0
echo: Last Updated: Jan 22 2015 19:16:46 | Author: (MakerLab, Delta)
Compiled: Jan 22 2015
echo: Free Memory: 2998 PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z80.00 E100.00
echo:Maximum feedrates (mm/s):
echo: M203 X200.00 Y200.00 Z200.00 E200.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X9000 Y9000 Z9000 E9000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z20.00 E20.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:Endstop adjustement (mm):
echo: M666 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P22.20 I1.08 D114.00
SENDING:G28
echo:SD init fail
SENDING:M114
X:0.00 Y:0.00 Z:213.20 E:0.00 Count X: 484.42 Y:484.42 Z:484.42
SENDING:M119
Reporting endstop status
x_max: open
y_max: open
z_min: TRIGGERED
z_max: open

1 回复
Andy medium avatar
#1 - 2 年前
Andy

回原点后三轴的移动距离增加了十倍 ,这是什么意思?步进脉冲数确定后,走多少就是多少了,0.1mm变成了1mm是不是因为脉冲数设定错误呢?没有触发限位就停止了?