MakerLab创客实验室 — Let's Make something.
现在注册
已注册用户请 登入
1 回复
Andy medium avatar
#1 - 2 年前
Andy

如果温度读取不正常,并不是PID引起的,是因为传感器配置不匹配。

试着配置为以下几种类型,看看有没有正常的:

//这几个都是100k的配置,依次进行测试一下
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup)

#define TEMP_SENSOR_0 1